Nanjing Metran Measurement & Control Instrument Co., Ltd.
Main products:Flowmeter,Pressure Sensor,Distribution Isolation,Digital Display Instruments,Isolation Safety Barrier
Contact Us
  • Contact Person : Ms. Hu Jessie
  • Company Name : Nanjing Metran Measurement & Control Instrument Co., Ltd.
  • Tel : 86-25-52366120
  • Fax : 86-25-52899138
  • Address : Jiangsu,Nanjing,No.12, Rungu Road, Guli Industrial Zone, Jiangning District, Nanjing
  • Country/Region : China
  • Zip : 211146

PID Digital temperature Controller

PID Digital temperature Controller
Product Detailed
Low cost manufacturer PID Digital temperature Controller 1.RS485/RS232 communication terminal 2.High performance switch power

MT6000Z/T/ MT6000G Series PID Digital Display Adjusting Instrument temperature Controller



Functional Overview 

MT6000Z/T /MT6000G series digital display adjusting instrument is in supporting use of sensors like thermocouple, thermal resistance etc. and transmitter whose output is direct current. It can measure, alarm, and adjust the thermal parameter (like temperature, pressure, differential pressure, flow, liquid level etc.) in the process of industry. Parameter measurement is displayed through digital. Adjustment is achieved through the output of relay contacts. 

 High performance switch power supply, alternating and direct current inputThe input signal, input type and measuring range can be set by Panel buttons. It adopts special module circuit with small volume, whole sealing structure, and stable performance. It provides feed output It can carry RS485/RS232 communication terminal


Technical Parameters

Input Signal: Please see the measuring range of input signalBasic Error: ±0.2%Setting Error: ±0.2%Resolution Capability: 1°CSetting Range: 5%-100%Control Contacts Capacity: Non-inductive load 220VAC 2ADisplay Modes: Three and a half LED display or light column displayEnvironment Temperature:0-50Relative Humidity: 85% (RH)Power Voltage: 24VDC±10% 50Hz

Dimension and Size of Holes

Installing Method: Panel mountingDimension: Horizontal type 160×80×160 (width ×height×depth)The Size of Holes: 152×76Dimension: Vertical type 80×160×160 (width ×height×depth)Size of Holes: 152×76Dimension: Square type 96×96×154 (width ×height×depth)Size of Holes: 92×92

Photo copyright reserved!

PID Digital temperature Controller

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.